ARC ROM Diamonds S.R.L.
  • Phone: 0040.264.455109
  • Fax: 0040.264.260898



Water based, maintenance wax for pre - treated surfaces

General properties

WAXED is a easy to use, water based, multipurpose maintenance solution especially developed for a routine maintenance of floors previously treated with the satin look effect treatments such as; STONE COAT, STONE SLATE and RAPID COTTO. The application of WAXED will restore the lost satin look due to general floor traffic and use, while replenishing the original protection of water repellency and dirt resistance to the natural stone, slate or terracotta floor surface. WAXED will not distort the clarity of the stone or terracotta pattern and will not yellow over time. UV resistant.

Directions for use

Dust mop the surface before application. Apply by cloth, lambs wool applicator or mop on clean and dry surfaces. On the pre treated floor surface apply one uniform coat of WAXED in circular motions, ensuring complete surface coverage. Smooth out any applicator marks and excess product. Depending on room temperature, allow 20/30 min curing time before resuming normal use of the treated floor.

Where to apply

The product is highly recommended for the maintenance on internal natural stone, slate and terracotta floors, pre treated with a satin look effect treatment being either STONE COAT, STONE SLATE or RAPID COTTO.


For routine daily cleaning we suggest the use of our hygienic detergent CLEAN STONE ( 24 ). To remove the treatment, we suggest the use of our wax remover STRIPPER ( 32 ) every 12-18 months.


Boxes of 12 bottles of 1 lt. / 4 containers of 5 lt.


Indicative coverage applying two coats of the product on surfaces of medium absorption is 15 20 m² / lt. (155-210 sq.ft. / lt.)