ARC ROM Diamonds S.R.L.
DELTA RESEARCH DIVISION
  • Phone: 0040.264.455109
  • Fax: 0040.264.260898

Products

Wet Seal

Solvent based, anti stain "wet look" finish for honed, tumbled, sandblasted marble, cobblestone and natural stone

General properties

WET SEAL protects the stone from moisture and general stains such as of oil, grease, dirt, food , mould and mildew. WET SEAL is recommended to protect and highlight the vibrant colours and texture of natural stone without distorting the clarity of the stone pattern. WET SEAL is highly recommended on exterior surfaces due to its long lasting properties. The anti stain action and enhancing properties is due to its technologically advanced formulation, protecting deep inside the stone pores for a long period of time. WET SEAL does not change the natural aspect of the stone or to the sanded grout surface and it will not create any type of film or plastic effect, while allowing vapour to escape. UV resistant.

Directions for use

Apply by cloth, lambs wool applicator or spray one coat of WET SEAL uniformly on a clean and dry surface. If applied by spray, remove any air bubbles from surface using a clean cotton cloth or lambs wool applicator. For absorbent materials; After a curing time of 5/6 hours, apply a second coat in a different direction to the first. We suggest to allow 12/24 hours, curing time before resuming normal use of the treated surface.To avoid and prevent the adhesion of grout, cement or other grouting substances to the tiles surface and pores and the possible staining that can result from the above substances, we highly recommend the application of the product PRE SEALER (23b) in order to protect the surface during the installation and to help/quicken the following clean up from the construction dirt.

Maintenance

For routine cleaning we suggest the use of our hygienic detergent CLEAN STONE (24). To remove stubborn or ingrain dirt from the external stones surface, we suggest the use of our heavy duty detergent TERGON (33).

Where to apply

The product is applied on internal or external rough, tumbled, honed, textured, split or flamed marble, granite and natural stone. WET SEAL provides maximum protection on very absorbent materials such as Adoquim (Cantera Stone ), Pietra Dorata and Tuffo .

Packaging

Boxes of 12 bottles of 1 lt. / 4 containers of 5 lt.

Coverage

Indicative coverage applying two coats of the product on surfaces of medium absorption is 8-10 m² / lt. (80-110 sq.ft. / lt.) On surfaces of low absorption is 15-20 m² / lt. (160-215 sq.ft. / lt.)