General properties

TOTAL WET waterproofs and enhances the color and design of internal and external stone, masonry, brick, slate and pavers surfaces. TOTAL WET is very resistant to high foot traffic and will not deteriorate or yellow over time. The superior water repellency and dirt resistance of TOTAL WET is due to its technologically advanced formulation, protecting and colour enhancing the stone for a long period of time. TOTAL WET does not change the natural aspect of the stone or to the sanded grout surface and it will not create any type of film or plastic effect, while allowing vapour to escape. UV resistant.TOTAL WET operates in the microporosities of materials giving a permanent "wet" effect.

Directions for use

Ensure tiles, adhesive beds and grouts are clean and completely dry before sealing. Spread the product using a brush, cloth, sponge or a spray gun. Use the right quantity that the material naturally can absorb. Then, after few seconds, clean (buff) the surfaces by a cleaned cloth. Allow a curing time of 4/6 hours, proceed to apply a second coat in a different direction to the first. We suggest to allow 12/24 hours, curing time before resuming normal use of the treated surface.

Short & long term maintenance

For routine cleaning of the treated surface, we suggest the use of hygienic detergent CLEAN STONE.
For the maintenance of external stone floors we suggest the use of TERGON.

Where to apply

Suitable on internal and external marble, granite, travertine, limestone, cement based terrazzo etc. polished, rough, sanded, brushed, flamed or honed.

Coverage

Indicative coverage applying two coats of the product on surfaces of medium absorption is 8-12 m² / lt. (80-130 sq.ft. / lt.)
On surfaces of low absorption is 20-24 m² / lt.(215-260 sq.ft. / lt.)

Packaging

Boxes of 12 bottles of 1 lt. / 4 containers of 5 lt.

Safety/ toxicity

Before using this product, please read the Material Safety Data Sheet (available through your local representative), and the precautionary statement on the product package, follow all applicable directions.

Attention
Our technical addvice-whether verbal, in writing or by way of trials-is given in good faith but without warranty, and this also applies where the proprietary rights of tird parties are involved. It does not relase you from the obligation to test the products supplied by us to their suitability for the intended processes and uses. The application, use and processing of the products are beyond our control and, therefore, entirely your own responsibility. Should, in spite of this, liability be established for any damage, it will be limited to the value of the goods delivered by us and used by you.