ARC ROM Diamonds S.R.L.
  • Phone: 0040.264.455109
  • Fax: 0040.264.260898


Stone Coat

Water based, water/dirt repellent, "satin look" finish for internal rough, honed and unpolished marble, granite and natural stone

General properties

STONE COAT protects the natural stone such as: Lime stone, White Cream, Botticino, marble of Trani, sandstone and the stone from Vicenza from moisture and dirt providing a satin look finish without distorting the clarity of the stone pattern. It is highly recommended on any type of porous surfaces in high traffic areas, where the open pores must be protected against ingrained dirt, providing the surface a soft mate sheen. The superior water repellency and dirt resistance of this water based product is due to its technologically advanced formulation, protecting deep inside the stone pores for a long period of time. STONE COAT does not change the natural aspect of the stone surface and it will not deteriorate or yellow over time, while allowing vapour to escape. UV resistant. Easy maintenance.

Directions for use

Apply by cloth, lambs wool applicator, mop or spray on clean surfaces.On traditional surfaces apply two coats of STONE COAT in circular motions, ensuring complete penetration. Smooth out any applicator marks and product excess. Allow 3/4 hours curing time between each application.We suggest to allow 12/48 hours, for complete curing time before resuming normal use and maintenance of the treated surface.


For routine cleaning we suggest the use of our hygienic detergent CLEAN STONE (24). To maintain the satin look finish, repeat the application of WAXED every 60 days, depending on the foot traffic. To remove the treatment , we suggest the use of our wax remover STRIPPER (32) every 12-18 months. On a dry surface re apply the application of STONE COAT.

Where to apply

The product is highly recommended on internal unpolished marble, granite and natural stone. It provides maximum protection on stones such as; limestone, sandstone and textured marble, granite and natural stone. Note: For complete stain protection, we recommend the use of Delta Research anti stain products prior to the application of Stone Coat on the surface.


Boxes of 12 bottles of 1 lt. / 4 containers of 5 lt.


Indicative coverage applying two coats of the product on surfaces of medium absorption is 10-20 m² / lt. (110-130 sq.ft. / lt.) On surfaces of low absorption is 20-25m² / lt. (215-270 sq.ft. / lt.)