General properties

LIGHT STONE protects internal installed stone surfaces, in particular; tumbled and sandblasted coloured marbles, cobblestones and natural stone from moisture and dirt providing a light coloured antique finish, enhancing the natural stone colours without distorting the clarity of the stone pattern. LIGHT STONE does not change the natural aspect of the stone surface and it will not create any type of film or plastic effect, while allowing vapour to escape. UV resistant. Treated surfaces with LIGHT STONE are easy to clean and to maintain.

Directions for use

On tumbled or sandblasted material, wash surface with AX CLEANER (35). Rinse with neutraliser solution diluted in accordance with label. Ensure tiles, adhesive beds and grouts are completely dry before sealing (5-10 days).Apply by cloth, lambs wool applicator in circular movements, one coat of LIGHT STONE uniformly on a clean and dry surface. Allow a curing time of 5 minutes, then proceed to remove all excess product using a clean cotton cloth soaked with SOLVENTE GAMMA (30). Repeat the operation until the desired antique effect is obtained. We suggest to allow 12/24 hours, curing time before resuming normal use of the treated surface.

Where to apply

The product is highly recommended on internal acid cleaned, honed, tumbled, sandblasted , marble , granite , natural stone and on antique cobblestone surfaces.

Packaging

Boxes of 12 bottles of 1 lt. / 4 containers of 5 lt.

Coverage

Indicative coverage applying two coats of the product on surfaces of medium absorption is 6-10 m² / lt. (70-110 sq.ft. / lt.) On surfaces of low absorption is 12-20 m² / lt. (150-220 sq.ft. / lt.)