ARC ROM Diamonds S.R.L.
  • Phone: 0040.264.455109
  • Fax: 0040.264.260898


Eco Toner

Water based "wet look" effect for natural stone

General properties

ECO TONER is a newly studied water based wet look treatment for the application on internal and external stone surfaces. ECO TONER once applied protects the stone surface from moisture and general stains, while providing a wet look colour enhancing of the natural stone colours without distorting the clarity of the stone pattern. Due to the products ecological formulation, the treatment is highly recommended for use in closed areas as it does not give off dangerous fumes and on humid stone surfaces where solvent based treatments cannot be used. ECO TONER does not change the natural aspect of the stone surface and it will not create any type of film or plastic effect, while allowing vapour to escape. UV resistant.

How to use

Apply by cloth, lambs wool applicator or spray one coat of ECO TONER uniformly on a clean and dry surface. If applied by spray, remove any air bubbles from surface using a clean cotton cloth or lambs wool applicator. Allow a curing time of 30/60 minutes, proceed to apply a second coat in a different direction to the first. We suggest to allow 12/24 hours, curing time before resuming normal use of the treated surface.

Where to apply

The product is highly recommended on internal acid cleaned, honed, tumbled, sandblasted , marble, granite, natural stone and on antique cobblestone surfaces. The treatment can be used on terracotta surfaces in order to obtain a wet look effect.


Indicative coverage applying two coats of the product on surfaces of medium absorption is 6-12 m² / lt. (65-115 sq.ft. /lt.). On surfaces of low absorption is 12-15 m² / lt. (115-160 sq.ft. / lt.).


Boxes of 1 x12lt - Boxes of 4 containers of 5lt