General properties

ECO STONE protects the stone from moisture and general stains such as oil, grease, dirt, food, mould and mildew. ECO STONE is recommended for delicate natural stone such as Sandstone, Carniglia, Pietra Dorata, Limestone, Peperino, encaustics, and terracotta surfaces. The anti stain action is due to its technologically advanced formulation, protecting deep inside the stone pores for a long period of time. ECO STONE does not change the natural aspect of the stone surface and it will not create any type of film or plastic effect, while allowing vapour to escape. UV resistant.

Directions for use

For newly laid floors, wash the floor with DE GRAUB to remove all installation dirt and rinse with abundant water and neutraliser. On old floors and surfaces wash with TERGON. Ensure tiles, adhesive beds and grouts are completely dry before sealing (10-15 days)Apply ECO STONE uniformly by brush or spray on clean and dry surfaces. If applied by spray, remove any air bubbles from surface using a clean cotton cloth or lambs wool applicator. Allow a curing time of 3/4 hours before applying a second coat of product. We suggest to allow 12/24 hours, curing time before resuming normal use of the treated surface.To avoid and prevent the adhesion of grout, cement or other grouting substances to the tiles surface and pores and the possible staining that can result from the above substances, we highly recommend the application of the product PRE SEALER / ECO STONE in order to protect the surface during the installation and to help/quicken the following clean up from the construction dirt.

Maintenance

For routine cleaning of the treated surface, we suggest the use of the hygienic detergent CLEAN STONE. For the maintenance of external stone floors we suggest the use of TERGON. If a satin effect is desired, apply STONE COAT to the floor.

Where to apply

The product is applied on internal or external honed marble, granite, natural stone and encaustics surfaces. ECO STONE is highly recommended on stones such as Pietra Dorata, Carniglia , Peperino, Serpentino of Italy and Stone of Bedonia.

Packaging

Boxes of 12 bottles of 1 lt / 4 containers of 5 lt

Coverage

Indicative coverage applying two coats of the product on surfaces of medium absorption is 4-6 m² / lt. (65-115 sq.ft. /lt.). On surfaces of low absorption is 10-20 m² / lt. (115-160 sq.ft. / lt.).